|
|
|
|
Service News
|
|
Copyright By FCA Italy S.p.A. - Printed 12/01/2017
|
|
|
Various models
Version: All versions with JTD engine: Panda (169 and 319), Punto (188), New 500 (150), Grande Punto, Punto EVO/Punto M.Y. 2012, Linea, Palio/Strada/Siena/Albea, Idea, Bravo/Brava, 500L, 500X, Marea, Stilo, Bravo, Tipo/Egea (356/357), Multipla, Croma, Sedici, Freemont, Fiorino/Qubo (225/300), Ulysse 121 and 179, Doblò (119/223), Doblò (152/263), Scudo (222 and 272), Ducato (230 - 244 – 250 and 290), Talento (296), Fullback (502/503)
|
|
|
|
|
1060 F 000 AA
|
HIGH PRESSURE FUEL PIPES
Instructions in case of disassembly - Network Information
|
|
|
Cancels and replaces Service News 10.09.15 of 17/03/2015 for extension to Tipo/Egea (356/357), Talento (296) and Fullback (502/503) models
|
OPERATIONS AT THE DEALERSHIPS
Each time the fuel supply system high pressure pipes are removed (see Fig. 1):
A connecting the high pressure pump (1) and the "Common Rail" fuel manifold (2);
B connecting the fuel manifold (2) to the injectors (3);
during refitting it is compulsorily required to replace the removed pipes with new pipes taken from Spare Part.
|
|
For the disassembly/assembly procedure, refer to the Service Manual.
|
Fig. 1
|
While refitting the new pipes, tighten the connectors both on the high pressure pump/manifold and on the manifold/injector side, to the prescribed torque as described in the procedure.
|
|