P0220 Accelerator pedal sensor 2

			Test results
1	COMPONENT CONCERNED	CONNECTIONS CHECK	OK (NO FAULTS DETECTED)	FAULT DETECTED	OPERATION
	Accelerator pedal connection	Check the condition of the connections	Go to Step 2	Accelerator pedal connector disconnected	Connect the accelerator pedal connector correctly
2	COMPONENT CONCERNED	ELECTRICAL CONNECTION CHECK	OK (NO FAULTS DETECTED)	FAULT DETECTED	OPERATION
	Accelerator pedal sensor wiring	Check for a short circuit to Vbatt. on the accelerator pedal sensor wiring	Go to Step 3	Presence of short circuit to Vbatt.	Restore correct insulation to battery positive
3	COMPONENT CONCERNED	ELECTRICAL CONNECTION CHECK	OK (NO FAULTS DETECTED)	FAULT DETECTED	OPERATION
	Accelerator pedal sensor wiring	Check the continuity of the wiring between the sensor and the engine control unit	Go to Step 4	Wiring interrupted	Restore the correct connections
4	COMPONENT CONCERNED	ELECTRICAL CONNECTION CHECK	OK (NO FAULTS DETECTED)	FAULT DETECTED	OPERATION
	Accelerator pedal sensor wiring	Check the correct connection to earth for the accelerator pedal sensor	Go to Step 5	Insulation to earth of the accelerator pedal sensor not correct	Restore the correct connection to earth for the accelerator pedal sensor
5	COMPONENT CONCERNED	ACCELERATOR PEDAL CHECK	OK (NO FAULTS DETECTED)	FAULT DETECTED	OPERATION
	Accelerator pedal	Check that the accelerator pedal is working correctly	End of diagnosis	The accelerator pedal is not working properly	Replace the accelerator pedal Op. 1068A20 and check that it is working correctly