H STEERING (VEHICLE BEHAVIOUR)

			Test results
1	COMPONENT CONCERNED	CHECK STEERING COLUMN CONNECTION TO CROSSMEMBER	OK (NO FAULTS DETECTED)	FAULT DETECTED	OPERATION
	Cross member	Check the screws connecting the steering column to the crossmember.	Go to Step 2	The screws are damaged and/or installed in an incorrect way and/or are not tightened to the prescribed torque; there is some clearance between steering column and crossmember	Restore the correct assembly of the steering column to the crossmember.
2	COMPONENT CONCERNED	CHECK STEERING WHEEL CONNECTION	OK (NO FAULTS DETECTED)	FAULT DETECTED	OPERATION
	Steering wheel	Check the steering wheel fixing nut	Go to Step 3	The nut is damaged and/or installed in an incorrect way and/or not tightened to the prescribed torque; there is some clearance in the steering wheel	Install the steering wheel in the proper way
3	COMPONENT CONCERNED	ADJUSTMENT SYSTEM CHECK	OK (NO FAULTS DETECTED)	FAULT DETECTED	OPERATION
	Adjustment system	Check the adjustment system integrity	Go to Step 4	The stalk is strained and/or broken	Replace the steering column Op. 4110A30
4	COMPONENT CONCERNED	ADJUSTMENT SYSTEM CHECK	OK (NO FAULTS DETECTED)	FAULT DETECTED	OPERATION
	Adjustment system	Check the adjustment system integrity	Go to Step 5	The adjustment handle mounting is strained and/or broken	Replace the steering column Op. 4110A30
5	COMPONENT CONCERNED	ADJUSTMENT SYSTEM CHECK	OK (NO FAULTS DETECTED)	FAULT DETECTED	OPERATION
	Adjustment system	Check the adjustment system integrity	End of diagnosis	The cam is damaged	Replace the steering column Op. 4110A30