Refitting

- Set the vehicle height to level -3 by operating the ride setting adjustment buttons on the dashboard.

- Deactivate the self-levelling suspension control system by simultaneously pressing (for at least 5 sec.) the two ride setting adjustment buttons on the dashboard. The LEDs in the buttons should both light up with a fixed light.

- Position the vehicle on the lift.

1. Undo nuts (1a) securing joint (1a) to anti-roll bar (1b) and remove.

Removing

- Check that the anti-roll bar joints are not damaged, otherwise replace them.

- With the help of a hydraulic lift if necessary, position the anti-roll bar joint in place and tighten the associated retaining nuts to the recommended torque.

- Remove the hydraulic lift.

- Lower the lift.

- Reactivate the self-levelling suspension control system by simultaneously pressing (for at least 5 sec.) the two ride setting adjustment buttons on the dashboard. The LEDs in the buttons should both go out.

- Check that the system is working correctly by carrying out a height adjustment cycle.

- Remove the vehicle from the lift.