1084A16 ENGINE OIL DIPSTICK TUBE

Removing ( Refitting

)

- Position the vehicle on the lift.

Op. 5530B54

- Disconnect the negative battery terminal.

	Description	Connector
-	BATTERY	See A001

Op. 5010B12 CLIMATE CONTROL UNIT AIR INTAKE DUCT - R.R.

Op. 1064B31 WASTEGATE SOLENOID VALVE GUARD - R.R.

Op. 1064B35 PRESSURIZED AIR SUPPLY PIPE TO WASTE GATE VALVE - R.R.

Op. 1064B36 PRESSURIZED AIR SUPPLY PIPE TO WASTE GATE ACTUATOR - R.R.

Op. 1064B44 WASTE GATE VALVE ACTIVATION SOLENOID VALVE - R.R.

Op. 1064B30 WASTEGATE SOLENOID VALVE MOUNTING BRACKET - R.R.

Op. 1048A39 SLEEVE FROM AIR CLEANER TO RIGID PIPE - R R

Op. 1048A38 PIPE BETWEEN AIR FILTER/FLOW METER - R.R.

Op. 1060G10 AIR FLOW METER - R.R.

Op. 1048A42 SLEEVE FROM FLOW METER TO TURBO CHARGER AIR INLET PIPE - R + R

Op. 1016A10 SOUND-PROOFING COVER - R.R

Op. 1064A31 HEAT SHIELD FOR TURBOCHARGER - R.R.

Op. 7055B51

Op. 1080B76 RIGID PRESSURE COLLECTION PIPE UPSTREAM OF THE PARTICULATE FILTER - R.R.

Op. 1080B83 EXHAUST GAS TEMPERATURE SENSOR ON PARTICULATE FILTER (D.P.F.) - R.R.

Op. 1076A47 HEAT SHIELD FOR CATALYTIC CONVERTER/PARTICULATE FILTER - R.R.

Op. 1080B77 RIGID PRESSURE PIPE DOWNSTREAM OF PARTICULATE FILTER - R.R.

Op. 1076B72 INTERMEDIATE EXHAUST PIPE WITH HOSE SECTION - R+R

Op. 1080B81 PARTICULATE FILTER (D.P.F.) - R.R.

- Remove the oil dipstick.

1. Tighten the upper screw fixing the oil dipstick tube to the vacuum reservoir.

1. Undo the crankcase lower fixing screw (1a) and remove the oil dipstick tube (1b) with gasket.

Refitting ( Removing

)

1. Place the oil dipstick tube (1a) with a new gasket in position and tighten the crankcase fixing screw (1b) to the prescribed torque.

Component	Fixing	Ø	Value (daNm)	Validity
Oil dipstick tube to crankcase	Screw	M8	2.3 ÷ 2.8	2.0 JTD 115 HP

- Tighten the upper screw fixing the oil dipstick tube to the vacuum reservoir.

- Insert the oil dipstick.