 |
 Removing
(
Refitting
)
- Position the vehicle on a lift. |
|
- Or |
|
Op. 7055B56 1. Undo the nut (1a) securing the anti-roll bar joint (1b) to the track control arm (1c) for the suspension frame and remove the rubber mounting (1d). |
 |
1. Undo the fixing nut (1a) and, using a special tool, remove the joint (1b) from the track control arm to the wheel hub (1c).
|
 |
1. Undo the front bolt securing the track control arm to the suspension frame. |
 |
1. Undo the rear bolt securing the track control arm to the suspension frame. |
 |
1. Remove the track control arm from the vehicle. |
|
|
Refitting
(
Removing
)
- Check that the track control arm is not damaged. - Place the track control arm in position and tighten the rear fixing bolt to the recommended torque.
- Tighten the front retaining bolt to the recommended torque.
- Position the track control arm joint on the wheel hub and screw in the fixing nut tightening it to the recommended torque.
- Position the rubber mounting and screw in the nut securing the anti-roll bar joint to the suspension frame track control arm tightening it to the recommended torque.
Op. 7055B56 |
|
- Or |
|
- Remove the vehicle from the lift. Op. 4450A10 FRONT WHEEL GEOMETRY - CHECK USING OPTICAL EQUIPMENT - INCLUDES ADJUSTMENT IF NECESSARY |
|