Refitting

- Apply the anti-oxidizing product for the time it takes for it to reach maximum efficiency.

For the use of chemical products closely follow the instructions and warnings on the safety chart that the supplier must give the consumer in accordance with the laws in force in the area (for Italy in accordance with Legislative Decrees 52/97 and 285/98 and subsequent modifications and additions).

1. Work at the bench and, using a universal extractor (1a) and an appropriate diameter tool (1b), remove the hub (1c) from the steering knuckle.

1. Rotate the steering knuckle and remove the bearing circlip.

1. Position the steering knuckle in the press, resting on a plate (1a) with an opening in the centre that allows the bearing (1b) to be removed.

2. Position the special tool on the bearing.

3. Extract the bearing from the steering knuckle on the press.

Removing

Check that the bearing is not damaged.

1. Position the steering knuckle (1a) on the press, resting on a plate (1b).

2. Position the bearing (2a) on the steering knuckle.

3. Position the special tool on the bearing.

4. Fit the bearing in the housing using the press.

1. Fit the circlip in the housing.

1. Position the hub (1a) on the press, resting on a plate (1b). Position the steering knuckle with the bearing (1c) on the hub (1a) and keep it in position.

2. Position the special tool on the steering knuckle.

3. Fit the steering knuckle with the bearing on the hub using the press.