|
|
|
|
Test results |
|
|
Engine compartment |
Carry out a road test to check whether, by accelerating progressively in third gear up to 3500 rpm, noise is present in the engine compartment |
End of diagnosis |
Noise in the engine compartment |
Go to Step 2 |
|
|
Air intake fastenings |
Check that the screws are tightened with the proper torque. Connecting bands are present and closed properly. Fastenings are intact. Mounting brackets intact. |
Go to Step 3 |
1. Fastenings not correct. 2. Fastenings broken. |
1. Restore correct fastenings. 2. Replace the air intake. Op. 1048A23 COLD AIR INTAKE FOR AIR FILTER - R.R. |
|
|
Intake line |
Check that the pipe is intact and that there is no excessive bleed / play in the coupling areas: - air intake / filter box - air intake pipe / body connection bracket |
End of diagnosis |
Presence of bleed in the coupling areas shown. Looseness / Noise. |
Re-tighten the fastenings where the leak/looseness was found; carry out a test on the car to make sure that the fault has gone |