P0335 Rpm sensor

			Test results
1	COMPONENT CONCERNED	ENGINE RPM SENSOR FASTENING CHECK	OK (NO FAULTS DETECTED)	FAULT DETECTED	OPERATION
	Engine rpm sensor	Check that the engine rpm sensor is fastened correctly	Go to Step 2	Engine rpm sensor not correctly fastened	Restore the correct fastening for the engine rpm sensor
2	COMPONENT CONCERNED	AIR GAP CHECK	OK (NO FAULTS DETECTED)	FAULT DETECTED	OPERATION
	Engine rpm sensor	Check the correct distance between rpm sensor and toothed wheel	Go to Step 3	Distance between rpm sensor and toothed wheel not correct	Restore the correct distance between rpm sensor and toothed wheel
3	COMPONENT CONCERNED	CONNECTIONS CHECK	OK (NO FAULTS DETECTED)	FAULT DETECTED	OPERATION
	Engine rpm sensor connections	Check that the connections are not faulty	Go to Step 4	Faulty connections	Restore the correct connections
4	COMPONENT CONCERNED	WIRING CHECK	OK (NO FAULTS DETECTED)	FAULT DETECTED	OPERATION
	Engine rpm sensor wiring	Check the wiring continuity	Go to Step 5	Faults in the continuity of the wiring	Restore the correct continuity of the wiring
5	COMPONENT CONCERNED	WIRING CHECK	OK (NO FAULTS DETECTED)	FAULT DETECTED	OPERATION
	Engine rpm sensor wiring	Check that the wiring is correctly insulated	Go to Step 6	Wiring insulation not correct	Restore the correct insulation for the wiring
6	COMPONENT CONCERNED	RPM SENSOR OPERATION CHECK	OK (NO FAULTS DETECTED)	FAULT DETECTED	OPERATION
	Rpm sensor	Check that the rpm sensor is working properly	Go to Step 7	Rpm sensor not working properly	Replace the rpm sensor Op. 1060D26 ENGINE RPM SENSOR - R+R
7	COMPONENT CONCERNED	TOOTHED WHEEL CHECK	OK (NO FAULTS DETECTED)	FAULT DETECTED	OPERATION
	Toothed wheel	Check that the toothed wheel is not ovalised	End of diagnosis	toothed wheel oval	Replace the toothed wheel