THIS PROCEDURE GENERATES VERY HIGH EXHAUST TEMPERATURES, DO NOT REPEAT A SECOND REGENERATION PROCEDURE IMMEDIATELY AFTER THE FIRST ONE, BUT WAIT AT LEAST 30 MINUTES.

A RESTRICTION VALUE BY 70 – 75% CORRESPONDS TO A STANDARD CONDITION THAT DOES NOT REQUIRE TO START THE REGENERATION PROCEDURE

Before starting this procedure, proceed as follows:

1. check that the outside of the exhaust pipe and the areas immediately surrounding it are clean;

2. remove the gas extraction intake from the exhaust pipe and make sure that nobody is passing close to the exhaust pipe during the whole procedure;

3. place the vehicle in an open area, far from heat sources;

4. keep the bonnet open during the whole procedure.