Refitting

- Deactivate the self-levelling suspension control system by simultaneously pressing (for at least 5 sec.) the two ride setting adjustment buttons on the dashboard. The LEDs in the buttons will both light up with a fixed light.

- Position the vehicle on the lift.

1. Undo bolts (1a) securing compressor module cover (1b) and remove.

Removing

- Check that the compressor module cover is not damaged; if it is, replace it.

- Place the compressor module cover in position and secure it with the bolts.

- Lower the lift.

- Reactivate the self-levelling suspension control system by simultaneously pressing (for at least 5 sec.) the two ride setting adjustment buttons on the dashboard. The LEDs in the buttons should both go out.

- Check that the system is working correctly by carrying out a height adjustment cycle.

- Remove the vehicle from the lift.