The conversion socket P125 comprises three connectors which receive/send the signals useful for the management of any additional systems.

In the detail, connector A:

• at pin 1 receives the 3rd brake light on signal via the connection with pin 48 of connector F of the Body Computer M001;

    See E2021 BRAKE LIGHTS

• at pin 2 receives the D+ alternator charge negative signal via the connection with pin 4 of connector H of the Body Computer M001;

• at pin 3 receives the vehicle speed speedometer signal (VSO), supplied by the braking system control unit M051 via the connection with pin 49 of connector F of the Body Computer M001;

• at pin 4 receives the door lock signal via the connection with pin 14 of connector E of the Body Computer M001;

• at pin 5 receives the door unlock signal via the connection with pin 32 of connector E of the Body Computer M001;

• from pin 6 sends the door/doors open signal via the connection with pin 33 of connector F of M001;

• at pin 7 receives a timed power supply ("SBMT") for the courtesy lights via the connection with pin 24 of connector E of the Body Computer M001;

• at pin 8 receives the courtesy light negative signal (dimmed) via the connection with pin 13 of connector F of M001;

• from pins 9 and 10 communicates via the B-CAN line with the other network nodes;

    See E1050 CAN CONNECTION LINES

• at pin 11 receives the negative side markers on signal via the connection with pin 4 of connector H of the Body Computer M001;

This signal is not available on versions with medium-long, long and extra long wheelbase because they have side markers fitted as standard.

    See E2010 SIDE LIGHTS / NO. PLATE LIGHTS

• at pin 12 receives the compressor engagement request;

    See E6020 AIR CONDITIONING

• at pin 14 receives the additional rear heater on signal;

See E6012

• at pin 13 receives an ignition-operated supply (INT) through the line protected by fuse F49 of the Body Computer M001 (pin 6 of connector E).

Connector B, on the other hand:

• at pin 1 is prepared for a power supply for the radio (+30) from the auxiliary battery;

• at pins 2 - 3 and 4 - 5 receives signals respectively for the left rear and right rear speakers via the connections with the radio P020 (B7 - B8 and B1 - B2 of connector A).

Connector C for the conversion socket P125 receives a direct battery power supply at pin A protected by maxifuse F73 (TRASF) of the maxifuse box on the battery B099 (connector E), whilst at pin B it receives a power earth via the connection with the right front seat access board earth C098.