S084 Rumorosità dell'impianto di climatizzazione

			Test results
1	COMPONENT CONCERNED	COOLANT LEVEL CHECK AND CLIMATE CONTROL SYSTEM CIRCUIT PRESSURE CHECK		OK (NO FAULTS DETECTED)	FAULT DETECTED	OPERATION
	Climate control system circuit	Switch on the climate control system (with engine on) for 10-15 minutes. Switch it off and wait for 45 minutes. Connect the climate control system repressurising station and check that the readings of the pressure values are compatible with the vehicle specifications (if there are no specifications, refer to the table below)		Go to Step 2	The pressure values do not comply with the required specifications	Empty the circuit, create vacuum and restore the correct coolant pressurisation
		External temperature (ºC)	LP and HP with AC OFF (bar)
		20	4.5 - 5
		25	5.5 - 6
		30	6.5 - 7
		35	7.5 - 8
		40	˜ 9
2	COMPONENT CONCERNED	COMPRESSOR FASTENING CHECK	OK (NO FAULTS DETECTED)		FAULT DETECTED	OPERATION
	Compressor	Check that the compressor is fastened correctly	Go to Step 3		The compressor is not correctly fastened	Fasten the compressor correctly
3	COMPONENT CONCERNED	POLLEN FILTER FASTENING CHECK	OK (NO FAULTS DETECTED)		FAULT DETECTED	OPERATION
	Pollen filter	Check the correct fastening of the pollen filter	Go to Step 4		The pollen filter is not correctly fastened	Fasten the pollen filter correctly
4	COMPONENT CONCERNED	EXPANSION VALVE FASTENING CHECK	OK (NO FAULTS DETECTED)		FAULT DETECTED	OPERATION
	Expansion valve	Check the correct fastening of the expansion valve	Go to Step 5		The expansion valve is not correctly fastened	Fasten the expansion valve correctly
5	COMPONENT CONCERNED	PASSENGER COMPARTMENT HEATER FAN FASTENING CHECK	OK (NO FAULTS DETECTED)		FAULT DETECTED	OPERATION
	Passenger compartment heater fan	Check the correct fastening of the passenger compartment heater fan	Go to Step 6		The passenger compartment heater fan is not correctly fastened	Fasten the passenger compartment heater fan correctly
6	COMPONENT CONCERNED	CONDENSER OPERATION CHECK	OK (NO FAULTS DETECTED)		FAULT DETECTED	OPERATION
	Capacitor	Check that the condenser is fastened correctly	End of diagnosis		The condenser is not correctly fastened	Fasten the condenser correctly