|
 Removing
(
Refitting
)
- Position the vehicle on the lift. Op. 5530B54 - Disconnect the negative battery terminal.
|
|
|
|
|
Op. 1064B35 PRESSURIZED AIR SUPPLY PIPE TO WASTE GATE VALVE - R.R. |
|
Op. 1064B36 PRESSURIZED AIR SUPPLY PIPE TO WASTE GATE ACTUATOR - R.R. |
|
Op. 1064B44 WASTE GATE VALVE ACTIVATION SOLENOID VALVE - R.R. |
|
Op. 1064B30 WASTEGATE SOLENOID VALVE MOUNTING BRACKET - R.R. |
|
|
|
|
Op. 1048A42 SLEEVE FROM FLOW METER TO TURBO CHARGER AIR INLET PIPE - R + R |
|
|
|
Op. 7055B51 Op. 1080B76 RIGID PRESSURE COLLECTION PIPE UPSTREAM OF THE PARTICULATE FILTER - R.R. |
|
Op. 1080B83 EXHAUST GAS TEMPERATURE SENSOR ON PARTICULATE FILTER (D.P.F.) - R.R. |
|
Op. 1076A47 HEAT SHIELD FOR CATALYTIC CONVERTER/PARTICULATE FILTER - R.R. |
|
Op. 1080B77 RIGID PRESSURE PIPE DOWNSTREAM OF PARTICULATE FILTER - R.R. |
|
Op. 1076B72 INTERMEDIATE EXHAUST PIPE WITH HOSE SECTION - R+R |
|
 |
1. Undo the screws (1a) and remove the fixing bracket (1b). |
 |
1. Loosen the nut (1a) securing the collar (1b) joining the turbocharger to the particulate filter. |
 |
- Lower the lift. 1. Rotate the collar joining the turbocharger to the particulate filter, widen it and move it to one side. 2. Remove the particulate filter and lay it on the ground. |
 |
1. If necessary, undo the screws (1a) and remove the mounting bracket (1b). |
 |
Refitting
(
Removing
)
1. If it was removed, place the mounting bracket (1a) in position and tighten the fixing screws (1b) to the prescribed torque.
|
 |
1. Place the particulate filter (1a) in its housing, engage it with the turbocharger by positioning the collar (1b) and screwing in the fixing nut (1c). |
 |
- Raise the lift. - Rotate the collar joining the turbocharger to the particulate filter. 1. Tighten the nut (1a) for the collar (1b) fixing the particulate filter to the turbocharger to the prescribed torque.
|
 |
1. Place the fixing bracket (1a) in position and tighten the screws (1b) to the prescribed torque.
|
|
|
Op. 1076B72 INTERMEDIATE EXHAUST PIPE WITH HOSE SECTION - R+R |
|
Op. 1080B77 RIGID PRESSURE PIPE DOWNSTREAM OF PARTICULATE FILTER - R.R. |
|
Op. 1076A47 HEAT SHIELD FOR CATALYTIC CONVERTER/PARTICULATE FILTER - R.R. |
|
Op. 1080B83 EXHAUST GAS TEMPERATURE SENSOR ON PARTICULATE FILTER (D.P.F.) - R.R. |
|
Op. 1080B76 RIGID PRESSURE COLLECTION PIPE UPSTREAM OF THE PARTICULATE FILTER - R.R. |
|
Op. 7055B51 |
|
|
Op. 1048A42 SLEEVE FROM FLOW METER TO TURBO CHARGER AIR INLET PIPE - R + R |
|
|
|
|
Op. 1064B30 WASTEGATE SOLENOID VALVE MOUNTING BRACKET - R.R. |
|
Op. 1064B44 WASTE GATE VALVE ACTIVATION SOLENOID VALVE - R.R. |
|
Op. 1064B36 PRESSURIZED AIR SUPPLY PIPE TO WASTE GATE ACTUATOR - R.R. |
|
Op. 1064B35 PRESSURIZED AIR SUPPLY PIPE TO WASTE GATE VALVE - R.R. |
|
|
|
|
|
- Connect the negative battery terminal.
Op. 5530B54 - Remove the vehicle from the lift. |