|
|
Test results |
|
|
Climate control system circuit |
Switch on the climate control system (with engine on) for 10-15 minutes. Switch it off and wait for 45 minutes. Connect the climate control system repressurising station and check that the readings of the pressure values are compatible with the vehicle specifications (if there are no specifications, refer to the table below) |
Go to Step 2 |
The pressure values do not comply with the required specifications |
Empty the circuit, create vacuum and restore the correct coolant pressurisation |
|
External temperature (ºC) |
LP and HP with AC OFF (bar) |
|
20 |
4.5 - 5 |
|
25 |
5.5 - 6 |
|
30 |
6.5 - 7 |
|
35 |
7.5 - 8 |
|
40 |
˜ 9 |
|
|
Climate control system circuit |
Switch on the climate control system (with engine running at 1500 rpm) with the minimum fan speed and the lowest temperature. Connect the climate control system repressurising station to the climate control system circuit and check that the readings of the temperature and pressure values are correct. |
Go to Step 3 |
Pressure levels incorrect |
Refer to the checklist See table L007 Impianto climatizzazione funziona ma raffredda lentamente |
|
DeltaT (ºC) |
Low Pressure (LP) (bar) |
High Pressure (HP) (bar) |
|
>8 |
1-3 |
10-14 |
|
|
Climate control system |
Check whether the customer claims about moisture in the passenger compartment |
End of diagnosis |
Moisture in the passenger compartment |
Go to Step 4 |
|
|
Climate control system drain |
Check the correct operation of the climate control system drain, specifically check that it is not obstructed |
End of diagnosis |
The climate control system drain is not operating correctly |
Restore the correct operation of the climate control system drain or, where necessary, replace it. Op. 5040C68 CONDENSATE DRAIN PIPE AND ANITI-CONDENSATION FILTER - ARRANGE |