0010T21 ENGINE COOLANT - CHECK DENSITY AND TOP UP LEVEL IF NECESSARY

- When the engine is cold, check that the level of coolant in the reservoir reaches the MAX reference on the reservoir.

The coolant level should be check with the vehicle on a flat surface.

- If necessary, undo the coolant reservoir cap and remove it, then top up the fluid to the MAX reference on the reservoir.

Do not remove the tank cap when the engine is hot as there is a risk of scalding.

Component	Type	Denomination	Classification	Quantity	Validity
Engine Cooling Circuit	Liquid	Mixture of 50% PARAFLU UP/water	CUNA NC 956-16, ASTM D 3306	11.0 l

Component	Type	Denomination	Classification	Quantity	Validity
Engine coolant circuit (for vehicles with Webasto additional heater)	Liquid	Mixture of 50% PARAFLU UP/water	CUNA NC 956-16, ASTM D 3306	11.15 l

Component	Type	Denomination	Classification	Quantity	Validity
Engine coolant circuit (for vehicles with under seat additional heater)	Liquid	Mixture of 50% PARAFLU UP/water	CUNA NC 956-16, ASTM D 3306	11.6 l

Component	Type	Denomination	Classification	Quantity	Validity
Engine coolant circuit (for vehicles with rear additional heater/air conditioner)	Liquid	Mixture of 50% PARAFLU UP/water	CUNA NC 956-16, ASTM D 3306	11.9 l

- Tighten the cap on the engine coolant reservoir.