P1302 Gearbox type recognition

			Test results
1	COMPONENT CONCERNED	GEARBOX LEARNING CHECK	OK (NO FAULTS DETECTED)	FAULT DETECTED	OPERATION
	Gearbox learning (with manual gearbox only)	Check whether the gearbox learning procedure has been carried out after the replacement of the engine management control unit	Go to Step 2	Gearbox learning procedure not carried out	Press the clutch with manual gearbox
2	COMPONENT CONCERNED	CLUTCH PEDAL SWITCH OPERATION CHECK	OK (NO FAULTS DETECTED)	FAULT DETECTED	OPERATION
	Clutch pedal switch	Connect the diagnostic equipment to the engine management control unit and check that the clutch pedal switch is working properly	Go to Step 3	The clutch pedal switch is not working correctly	Replace the clutch pedal switch Op. 5580A38 SWITCH ON CLUTCH PEDAL FOR CRUISE CONTROL - R+R
3	COMPONENT CONCERNED	ENGINE MANAGEMENT CONTROL UNIT OPERATION CHECK	OK (NO FAULTS DETECTED)	FAULT DETECTED	OPERATION
	Engine management control unit	Check that the engine management control unit is working correctly	End of diagnosis	Engine management control unit not working properly	Replace the engine management control unit Op. 1060G80