0010T11 ENGINE OIL - CHECK LEVEL AND TOP UP, IF NECESSARY
|
|
The engine oil level check should be carried out with the vehicle on a flat surface with the engine off a few minutes (5) after the engine has been switched off.
|
- Extract the engine oil dipstick, clean it and then fully reinset it, extract it and check that the level is between the MIN and MAX marks on the actual dipstick.
- If the oil level is close to or actually below the MIN mark, add the recommended oil through the filler until it reaches the MAX mark.
|
If, after checking, the engine oil level is above the MAX mark, it must be corrected.
|
|
|
After topping up the engine oil, before checking the level, let the engine run for a few seconds and wait for a few minutes after it has been switched off.
|
|
Engine lubrication circuit |
Oil |
SELENIA WR P.E. |
SAE 5W-30 |
5.7 l |
2.0 JTD 115 HP |
|
|
The table shows the quantity required for periodic replacement.
|
|