All the electrical systems and circuits are supplied by the battery A001.

The main supply lines are protected by the maxifuse box B099 fitted on the battery that contains the fuses labelled according to the circuits protected:

• CVM (F70): engine compartment junction unit B001 power supply, at connector X;

• CPL1 (F71): Body Computer M001 main supply, at pin A of connector A;

• CPL2 (F72): Body Computer M001 secondary supply, at pin B of connector A;

• TRASF (F73): transformer socket P125 power supply, at pin A of connector C.

See E3094

The direct battery supply protected by maxifuse F72 (CPL2) is sent to the additional fuse box B098 through the Body Computer M001 (pin A of connector B).

A special "powerval" fuse (CAL4) - connector B - is used in junction unit B099 designed to protect the starter motor A020.

    See E5010 STARTING AND RECHARING

A direct battery power supply reaches the controlled suspension fuses B107 from connector F of control unit B099.

See E7070

Other circuits are supplied by turning the ignition key H001 to various positions:

• in the MAR-ON position, numerous circuits and ignition-operated services protected by fuses in Body Computer M001 (INT line) are supplied - from pin 2 of connector B of H001 to pin 2 of connector G of M001 - and from the fuses in engine compartment junction unit B001 (15/54 line) - from pin 1 of connector A of H001 to pin 30 of connector A of B001 -;

• starter motor A020 (line 50) receives a power supply in the AVV position - from pin 3 of connector A of H001 -.

    See E5010 STARTING AND RECHARING

During starting, some circuits are disconnected ("INT/"A line) - pin 1 of connector B of H001 -.

The Body Computer M001 receives power supply at pin 9 of connector G and, through the line protected by a suitable fuse (F31), it interrupts a set of "secondary" loads (power sockets, air conditioning system, etc.).

The Body Computer M001 uses this power supply for the management of its own loads via its built-in relay switches.

The Body Computer M001 is also connected to the central dashboard earth C022 (connector A) via pins 1 and 11 of connector G.