|
 Removing
(
Refitting
)
- Position the vehicle on the lift. Op. 5530B54 - Disconnect the negative battery terminal.
Op. 7055B51 |
|
|
|
Op. 1064B35 PRESSURIZED AIR SUPPLY PIPE TO WASTE GATE VALVE - R.R. |
|
Op. 1064B36 PRESSURIZED AIR SUPPLY PIPE TO WASTE GATE ACTUATOR - R.R. |
|
Op. 1064B44 WASTE GATE VALVE ACTIVATION SOLENOID VALVE - R.R. |
|
Op. 1064B30 WASTEGATE SOLENOID VALVE MOUNTING BRACKET - R.R. |
|
|
|
|
Op. 1048A42 SLEEVE FROM FLOW METER TO TURBO CHARGER AIR INLET PIPE - R + R |
|
|
 |
1. Adjust the clip and disconnect the quick connector for the coolant outlet pipe from the engine oil heat exchanger, heat exchanger side. |
 |
1. Adjust the quick connector, disconnect the coolant return pipe from the vehicle inner heater and move it to one side. 2. Disconnect the quick connector for the coolant outlet pipe from the engine oil heat exchanger, intake chamber side, and remove it. |
|
|
Refitting
(
Removing
)
- Place the coolant outlet pipe to the engine oil heat exchanger in position and connect the quick connector to the air chamber. - Connect the quick connector for coolant return pipe from the vehicle inner heater. - Adjust the clip and connect the quick connector for the coolant outlet pipe from the engine oil heat exchanger, heat exchanger side. |
|
|
|
Op. 1048A42 SLEEVE FROM FLOW METER TO TURBO CHARGER AIR INLET PIPE - R + R |
|
|
|
|
Op. 1064B30 WASTEGATE SOLENOID VALVE MOUNTING BRACKET - R.R. |
|
Op. 1064B44 WASTE GATE VALVE ACTIVATION SOLENOID VALVE - R.R. |
|
Op. 1064B36 PRESSURIZED AIR SUPPLY PIPE TO WASTE GATE ACTUATOR - R.R. |
|
Op. 1064B35 PRESSURIZED AIR SUPPLY PIPE TO WASTE GATE VALVE - R.R. |
|
|
|
|
Op. 7055B51 - Connect the negative battery terminal.
Op. 5530B54 - Remove the vehicle from the lift. |