☰ Sommaire ← 4450B14 WHEELS (FOUR) - R+R4450C FRONT WHEEL HUBS →
4450B80 CAP FOR ONE WHEEL - R+R

APPLICABLE TO VERSIONS WITH: Self-levelling suspension

Removing ( Refitting )

Before raising the vehicle, deactivate the system by simultaneously pressing the two ride setting adjustment buttons on the dashboard for at least 5 sec. The LEDs in the buttons will both light up with a fixed light.

- Position the vehicle on a lift.

1. Undo fastening bolts (1a) and remove wheel sump (1b).
Refitting ( Removing )

- Check that the wheel sump is not damaged.

- Position the wheel sump in its housing and tighten the bolts to the recommended torque.

 

Component

 

Fixing

 

Ø

 

Value (daNm)

 

Val.

 

15" Wheel

 

Stud bolt

 

M14x1.5

 

16.0

 
 

Component

 

Fixing

 

Ø

 

Value (daNm)

 

Val.

 

16" Wheel

 

Stud bolt

 

M16x1.5

 

18.0

 

- Remove the vehicle from the lift.

APPLICABLE TO VERSIONS WITH: Self-levelling suspension

When the vehicle is back on the ground at the end of the procedure, reactivate the self-levelling suspension control system by simultaneously pressing (for at least 5 sec.) the two ride setting adjustment buttons on the dashboard. The LEDs in the buttons should both go out.