P010F Air mass/air flow meter incongruence

			Test results
1	COMPONENT CONCERNED	INTAKE DUCT CHECK	OK (NO FAULTS DETECTED)	FAULT DETECTED	OPERATION
	Inlet duct	Check the condition/obstruction of the intake ducts	Go to Step 2	Faulty intake ducts	Restore the intake duct to correct operation
2	COMPONENT CONCERNED	WIRING CHECK	OK (NO FAULTS DETECTED)	FAULT DETECTED	OPERATION
	Turbo sensor wiring	Check the continuity/insulation of the wiring between turbo sensor and engine management control unit	Go to Step 3	Wiring defective	Restore the correct wiring
3	COMPONENT CONCERNED	TURBO SENSOR CHECK	OK (NO FAULTS DETECTED)	FAULT DETECTED	OPERATION
	Turbo sensor	Check that the turbo sensor is working correctly	Go to Step 4	Turbo pressure sensor faulty	Replace the turbo sensor Op. 1060G16
4	COMPONENT CONCERNED	WIRING CHECK	OK (NO FAULTS DETECTED)	FAULT DETECTED	OPERATION
	Flow meter wiring	Check the continuity/insulation of the wiring between air flow meter and engine management control unit	Go to Step 5	Wiring defective	Restore the correct wiring
5	COMPONENT CONCERNED	AIR FLOW METER CHECK	OK (NO FAULTS DETECTED)	FAULT DETECTED	OPERATION
	Flow meter	Check that the air flow meter is working correctly	End of diagnosis	Air flow meter defective	Replace the air flow meter Op. 1060G10