|
|
|
Test results |
|
|
Connect the diagnosis equipment to the climate control system control unit and check whether there are specific errors related to the fan |
Go to Step 2 |
Errors related to the fan found |
Proceed as instructed by the diagnosis tool |
|
|
Fan electrical wiring connections check Disconnect/reconnect the fan wiring. |
Go to Step 3 |
Fault detected in the fan wiring |
Restore the correct wiring of the fan |
|
|
Check that the fan rotates at all speeds by activating it using the switch |
Go to Step 4 |
The fan does not work at max. speed |
Check the condition of the vehicle fuse and replace it, if necessary |
|
|
Check the condition of the ceramic resistor |
Go to Step 5 |
Ceramic resistor not working correctly |
Replace the ceramic resistor Op. 5040C44 FAN MOTOR ELECTRONIC VARIATOR - R+R |
|
|
Check all the components in the vehicle's electrical system that may cause irregular/excessive current uptake, such as: battery and alternator. |
Go to Step 6 |
Fault found on the component |
Replace the component that causes the fault |
|
|
Check that the climate control system control unit is working correctly |
End of diagnosis |
Climate control system control unit not working properly |
Replace the climate control system control unit Op. 5040D14 CONTROL UNIT WITH AUTOMATIC AIR CONDITIONING CONTROL PANEL - R.R. |