4450B02 LEFT FRONT WHEEL

APPLICABLE TO VERSIONS WITH: Self-levelling suspension

Removing ( Refitting

)

Before raising the vehicle, deactivate the system by simultaneously pressing the two ride setting adjustment buttons on the dashboard for at least 5 sec. The LEDs in the buttons should both light up with a fixed light.

- Position the vehicle on a lift.

1. Undo bolts (1a) and remove wheel assembly (1b).

Refitting ( Removing

)

- Place the wheel in position and secure it using the bolts, but without tightening them.

- Remove the vehicle from the lift.

- For versions with 16" rims, tighten the wheel bolts to the recommended torque.

Component	Fixing	Ø	Value (daNm)	Val.
16" Wheel	Stud bolt	M16x1.5	18.0

- For versions with 15" rims, tighten the wheel bolts to the recommended torque.

Component	Fixing	Ø	Value (daNm)	Val.
15" Wheel	Stud bolt	M14x1.5	16.0

APPLICABLE TO VERSIONS WITH: Self-levelling suspension

When the vehicle is back on the ground at the end of the procedure, reactivate the self-levelling suspension control system by simultaneously pressing (for at least 5 sec.) the two ride setting adjustment buttons on the dashboard. The LEDs in the buttons should both go out.