 |
 Removing
(
Refitting
)
- Position the vehicle on a lift. |
|
Or: |
|
1. Undo nut (1a) securing the rod anchoring the end of the anti-roll bar (1b) to track control arm (1c) for the suspension frame, and remove rubber mounting (1d). 2. Undo the nut securing the rod anchoring the end of the anti-roll bar. |
|
|
- Remove the rod anchoring the end of the anti-roll bar from the vehicle. |
|
|
Refitting
(
Removing
)
- Check that the rod anchoring the end of the anti-roll bar is not damaged. - Place the rod anchoring the end of the anti-roll bar in position and screw in the fixing nut, tightening it to the recommended torque.
|
|
Or: |
|
- Remove the vehicle from the lift. |