 |
 Removing
(
Refitting
)
- Position the vehicle on a lift. |
|
Op. 7055B56 Op. 1076B72 INTERMEDIATE EXHAUST PIPE WITH HOSE SECTION - R+R |
|
|
- Carry out the following operations working on both sides: 1. Undo the nut (1a) securing the anti-roll bar joint (1b) to the track control arm (1c) for the suspension frame and remove the rubber mounting (1d). |
 |
1. Working via the slits in the suspension frame, undo the bolts (1a) fixing the anti-roll bar (1b). |
 |
1. Remove the anti-roll bar from the vehicle. 2. Undo the nuts (2a) securing the anti-roll bar joints (2b) and remove them. |
|
|
Refitting
(
Removing
)
- Check that the anti-roll bar is not damaged. - Place the anti-roll bar joints in their housing and screw in the fixing nuts tightening them to the recommended torque.
- Position the anti-roll bat in its housing and screw in the fixing bolts tightening them to the recomended torque.
- Working on both sides, position the rubber mounting and screw in the nut securing the anti-roll bar joint to the suspension frame track control arm tightening it to the recommended torque.
|
|
Op. 1076B72 INTERMEDIATE EXHAUST PIPE WITH HOSE SECTION - R+R |
|
Op. 7055B56 |
|
- Remove the vehicle from the lift. |